CNC Plasma Pipe Cutting - Beveling Machines and 3D Profile Plus Software
Watts Specialties has over 1,700 machines at work each day in 72 countries - this demonstrates the reliability of our products. Our CNC plasma pipe cutters are manufactured in the USA and provide cutting and automated welding solutions for the toughest requirements in the metalworking industry - we can even custom-manufacture a machine for your company.
Plasma Pipe Cutting and
Beveling Machines
Request a Machine Quote
Customer Stories
Company Executives Discuss how Watts Specialties Pipe Cutting Machines have Increased Efficiency, Cut Manhours and Generated more Profits.
See all of our customer stories.
We are saving more on labor than we expected...the W-364 cuts with superior quality leaving a clean bevel...cuts stainless steel like butter.
Read the story...
Mike Nelsen
Plant Manager, MFS
We save around 100 feet of pipe every month due to the efficiency of the Watts W-122 pipe cutting machine and 3D-Profile Plus software.
Read the story...
Bill Alexander
Owner-CEO
...3D-Profile Plus software merges seamlessly...nesting cuts increased efficiency...reduced material waste...
Read the story...
Brian Hund
Operations Mgr
Using the Watts Specialties WM-60
6-axis pipe profiler, a job that once took seven hours to cut was complete in less than an hour...
Read the story...
Jeffrey Bunker
President, Piping Systems, Inc.
We are cutting around 50-80 vessels per month...what normally would take 10 hours with the old system of cutting and grinding by hand can be done in one hour.
Read the story...
Jeremy Watts
Director of Production, JW Williams
The Watts Specialties system allows us to make precise, clean cuts in a minimal amount of time...spending less on prep time and less on manhours.
Read the story...
Mike Smith
General Manager
...increase in productivity. Pipe cuts that were previously taking one man 40 hours to complete are now being cut in 8 hours - including olets!
Read the story...
Beth Thullen
Fab Shop Superintendent
We have cut more than 2,700 different parts with multiple cuts - over 12,000 feet of pipe...getting great value with our Watts Specialties machine.
Read the story...
Eric Robertson
Fabrication Manager, Roeslein
...[intricate cuts] would have taken an entire day of set up - with the
Watts Specialties W-484 machine...multiple cuts get done in minutes...
Read the story...
David Branscum
Production Mgr, GM SSI
We went from two guys cutting pipe all day...to cutting two days a week. The labor savings alone
justified the purchase of the
Watts Specialties machine.
Read the story...
John Ferrucci
VP, F+F Mechanical
...with the W-364 all cuts are programmed and done...takes 10-12 minutes...Laying it out manually, cutting and cleaning would have taken two-hours.
Read the story...
Mike Shinn
CEO, Shinn Mechanical
The Watts Specialties W-244, six axis machine has enabled us not only to grow, it has opened up more business opportunities as well.
Read the story...
Nick Porter
COO, Porter Pipe
Watts Specialties offered us a rental machine so we could get started quickly and see the benefits before we made a large capital commitment.
Read the story...
Garett Andersen
Director - Field Operations
The Watts Specialties W-244 machine bed and conveyors with rollers...enhances our safety and cuts down on the labor of moving pipe around.
Read the story...
Todd Burrell
Fabrication Manager, Ivey Mechanical
1,796
Watts machines in operation
Service Centers in
8 different countries
Customer Support ready to go
Distributors around
the world
LPSC Manual Cutting Machines
W-116 and W-132
The W-116 and the W-132 LPSC (Long Pipe Straight Cutter) Machines
are capable of cutting and beveling 1 1/2" to 32" diameter pipe up to 20' long. (Additional lengths are available based on your needs). Complete with oxy fuel torch and magnetic valve manifold, with plasma interface and wiring to attach customer supplied plasma cutter. The torch is manually adjusted to the desired bevel angle, these cutting and beveling machines that can save your company money on labor and material cost.
The W-132 machine is capable of cutting and beveling 3" to 32" pipe.
2-Axis CNC Pipe Cutting Machines
W-122 | W-242 | W-362
These are 2-Axis CNC pipe cutting and beveling machines capable of cutting from 2" to 36" diameter pipe on beds from 20' to 50' long. The W-242 and W-362 machine beds can hold up to 500 lbs per foot up to 20,000 lbs. All of these machines come with plasma and oxyfuel torches, make clean cuts and clean bevels.
All of these machines come with our 3D-Profile Plus Pipe Cutting Software for at-machine and remote pipe cut programming and job management.
6-Axis CNC Pipe Cutting Machines
W-124 | W-244 | W-364
These are the original Watts 6-axis 3D pipe cutting machines with a profiling carriage on precision machined and hardened track. Simultaneous motion maintains the torch cutting position along the linear axis of the pipe and perpendicular to the linear axis to perform beveled holes and end cuts. All of the 6-axis machines make extremely clean cuts and bevels on large diameter pipe.
All of these machines come with our 3D-Profile Plus Pipe Cutting Software for at-machine and remote pipe cut programming and job management. The software vastly simplifies the importing, design and nesting of parts, streamlines job estimating, scheduling and allows job tracking in real-time.
6-Axis Large Pipe Profiling Machines
W-484 | W-604
The Watts Large Pipe Profiling Machines convey and rotates large pipe on a 25' to 50' machine bed. These machines can handle pipe from 4" to 48" or 60" OD and are capable of supporting 1500 lbs. per foot to a maximum of 30,000-50,000 lbs. In addition, our 3D-Profile Plus software adds tremendous facility and capability for multiple cuts, nested cuts, and efficient material usage.
W-484 Pipe Cutting Machine
W-604 Pipe Cutting Machine
3D-Profile Plus Software
Watts Specialties 3D-Profile Plus CAM modules link our machines to both upstream and downstream workflows, significantly reducing production time, material costs and errors. Our thermal cutting machines make 3D contours as part of an integrated process chain rather than an isolated element.
3D-Profile Plus enables your CNC plasma pipe cutter machine to design, import, nest and communicate with most CAD systems.
3D-Profile Plus nesting module: Once all the parts have either been modeled or alternatively imported, with a single command our software automatically nests the parts on a pipe. This algorithm for such optimal nesting can save up to 10% in material cost. The pipe segments to be cut are then shown in 3D on the monitor.
Watts Specialties Brochure
"Our machines are being used for multi-million dollar projects all around the world," said Dave Dunham, Managing Director for Watts-Specialties.
Download the brochure
CNC Plasma-Oxy Fuel Pipe Cutters
Our CNC Plasma Pipe Cutting Machines are
engineered and manufactured in the USA for the most demanding fabrication projects around the world.
Watts Specialties industrial machines range from the Eco Series, capable of handling pipe from 2" to 36" OD up to machines capable of handling large diameter pipe up to 48" OD.
Our machines offer superior pipe cutting, beveling and joint cuts of all types. In addition, our 3D-Profile Plus Software enables efficient nesting of pipe cutting for multiple cuts...and multiple pipes. Program at the monitor and hit the "Start" button.
Roeslein & Associates, Inc. is an engineering, modular fabrication, and construction company providing turnkey project solutions by emphasizing a modular engineering execution early in the planning process so fabricated modules can be easily transported via truck, rail, or sea.
We have cut more than 2,700 different parts with multiple cuts on most of them - over 12,000 feet of pipe, at 158 tons. We are getting great value with our Watts Specialties machine.
- Read the Story...
- See Our Customer Stories
CNC Pipe Profiling Houston
Plasma I-Beam Cutting Machines Dallas
Oxy-Fuel Pipe Profiler Fort Worth
3 Axis-5 Axis, 6 Axis Cutting-Beveling Austin
Automated Pipe Profiling Odessa
Large Diameter Plasma Pipe Cutting-Beveling
CNC Pipe Plasma Cutter Equipment Calgary
Automated Pipe Cutting-Beveling Alberta
CNC Plasma I-Beam Cutting Machines Edmonton
Oxy Fuel Pipe Profiler Fort McMurray
3 and 5 Axis Pipe Cutting-Beveling Red Deer
Large Vessel Profiling Equipment Montreal
Large I-Beam Cutting Machines Toronto
|